Model: SCZ-80A-1000V-EU G002 12VR
Main Parameter
Max operating temperature
Min operating temperature
Rated voltage
Rated current
Rated current: DC+/DC-: 80A, L1/L2/L3/N: 32A
Applicable wire diameter: 16mm², Insulation outer diameter: Φ8.0±0.2
12V electronic lock on the right side
Meet TUV/CE certification requirements
Plug-in dust protection cap; Mounting method is rear mount
10,000 plug and unplug cycles, stable temperature rise
SCZ series European standard CCS 2 socket are installed on electric vehicles, CCS type 2 inlet. By cooperating with CCS combo 2 DC charging cable, the DC charging function is realized. The products meet IEC 62196.3-2022 and RoHS requirements.
| Electrical properties | |
| Rated current | DC+/DC-：80A； L1/L2/L3/N：32A； PP/CP：2A; |
| Wire Diameter | DC+/DC-: 16mm²; Outer diameter: Φ8.0±0.2; |
| Rated voltage | DC+/DC-: 1000V DC; L1/L2/L3/N: 480V AC; PP/CP: 30V DC |
| Withstand voltage | 3000V AC / 1min. (DC + DC- PE) |
| Insulation resistance | 1000V DC, ≥5000MΩ (normal temperature and humidity); ≥100MΩ (humid state) |
| Terminal temperature rise | <50K |
| Electronic locks | 12V |
| Electronic locks location | right side |
| Mechanical properties | |
| Insertion/withdrawal cycles | >10,000 times |
| Insertion/Withdrawal force | <100N |
| Environmental properties | |
| Ambient temperature | -40℃~+50℃ |
| Degree of Protection | IP55(When not mated) IP44(After mated) |
| Salt spray class | 96h |
| Main material | |
| Shell | PA |
| Insulation part | PA |
| Sealing part | Silicone Rubber |
| Contact part | Copper alloy |
| Mounting | |
| Mounting type | Rear mounting (0 to 90 degree frontal inclination possible) |
| Mounting hole diameter | 7 mm (ø) |
| Fixing screws | M6 |
Temperature Sensor
PT1000 temperature monitoring principle:
AC: 1 temperature sensor installed at L1 terminal
DC: 2 temperature sensors are installed at the DC+/DC- terminals respectively
Temperature sensor model: PT1000, the temperature sensor model can be adjusted according to customer needs.
Suggested temperature control method: limit the charging current when the temperature reaches 100°C, and stop charging when the temperature reaches 120°C.
Requirement reason: IEC62196 stipulates that the working temperature of charging products is -30℃～+50℃, and the maximum temperature rise of the terminals is 50K. When the temperature reaches 100°C, the current should be limited to avoid continuous temperature rise. In order to prevent the internal components and cables of charging products from aging at high temperatures, the charger should stop charging when the temperature reaches 120°C.
PT1000 temperature sensor parameters
Item | Parameters |
Rated current | ≤0.3mA |
Insulation resistance | ≥100MΩ（100V DC） |
Withstand voltage | 3000V AC (60s) |
Flame retardant grade | UL94 V-0 |
If you are interested in our products, please feel free to send an email to info@molead.com or fill out the message form below. Our sales representative will contact you within 24 hours.