Model: SCZ-16A-480V-EU
Main Parameter
Max operating temperature
Min operating temperature
Rated voltage
Rated current
Rated current：L1/L2/L3/N: 16A
Rated voltage：480 V AC three-phase
Cable specification：L1/L2/L3/N: 2.5mm², Insulation OD：Φ3.55±0.15
The temperature sensor is close to the power terminal, with high sensitivity, accuracy and reliability
12V DC electronic lock, switch type/resistive type optional
SCZ series European standard TYPE 2 charging sockets are installed on electric vehicles, and can realize charging function by cooperating with Type2 AC charging cables. The products meet IEC 62196.2, standard interface 2-IIf, and RoHS2.0 requirements.
| Electrical properties | |
| Rated current | L1/L2/L3/N: 16A； PP/CP：2A |
| Wire Diameter | L1/L2/L3/N: 2.5mm²; Outer diameter: Φ3.55±0.15 |
| Rated voltage | L1/L2/L3/N: 480V AC; PP/CP: 30V DC |
| Withstand voltage | L1/L2/L3/N/PE and other contacts: 2000V AC(normal temperature); other contacts:500V AC(normal temperature) |
| Insulation resistance | ≥5000MΩ(normal temperature) under 1000V DC |
| Terminal temperature rise | <50K |
| Electronic locks | 12V |
| Electronic locks location | Top center |
| Mechanical properties | |
| Insertion/withdrawal cycles | >10,000 times |
| Insertion/Withdrawal force | <100N |
| Environmental properties | |
| Ambient temperature | -40℃~+50℃ |
| Degree of Protection | IP44(After mated) |
| Salt spray class | 96h |
| Main material | |
| Shell | PA |
| Insulation part | PA |
| Sealing part | Silicone Rubber |
| Contact part | Copper alloy |
| Mounting | |
| Mounting type | Rear mounting |
| Mounting hole diameter | 6.5 mm (ø) |
| Fixing screws | M6 |
NTC10K temperature monitoring theory:
AC: one temperature sensor NTC10K for L1 pin
Temperature sensor model: NTC R25℃=10KΩ±1% ,the temperature sensor model can be adjusted according to customer needs.
If you are interested in our products, please feel free to send an email to info@molead.com or fill out the message form below. Our sales representative will contact you within 24 hours.